Skip to content
FREE NEXT DAY SHIPPING ON ALL ITEMS
FREE NEXT DAY SHIPPING ON ALL ITEMS
Door Restore Colour Reviver | Composite & uPVC Doors

Door Restore Colour Reviver | Composite & uPVC Doors

by GLEAN

£12 - £35
£14
£12 - £35
£14

Bring faded, weathered exterior surfaces back to life with GLEAN Door Restore Colour Reviver. Designed to revive the original depth and richness of colour, this easy-to-use treatment helps refresh composite doors, uPVC, fibreglass (GRP), coloured plastics and other suitable exterior surfaces.
The fast-acting formula works by re-wetting the pigments within faded surfaces, helping restore their appearance without the need for repainting. It is ideal for refreshing a tired-looking front door, window frames, shutters, guttering, decking and other suitable coloured outdoor surfaces.

FAQs

1. What surfaces can this product be used on?
It’s designed for use on:
• UPVC doors and windows
• Composite doors
• Fibreglass/GRP surfaces
• Plastic cladding and trims

2. What does it do?
It restores the original depth of colour and sheen to faded, weathered exterior surfaces while adding UV protection and water repellency.

3. What formats are available?
• 400ml Aerosol – ideal for quick, even application on smooth and detailed surfaces
• 1 Litre Tin – great for larger areas and brush/wipe-on use

4. How do I apply the product?
For aerosol:
• Shake well
• Spray evenly from 15–20cm away
• Allow to absorb and dry naturally
For tin:
• Apply with a soft cloth or brush
• Rub evenly into the surface
• Wipe away excess and allow to dry

5. How long does it take to dry?
• Touch dry: 15–30 minutes
• Fully cured: Within 24 hours

6. How long does the effect last?
Typically lasts up to 12 months, depending on exposure to sun and weather. Reapply as needed to maintain the look.

7. Will it change the colour of my door?
No, it revives the existing colour without repainting. It enhances depth and richness, especially on faded surfaces.

8. Can I use it on painted or powder-coated surfaces?
It’s not intended for use on painted metal or powder-coated surfaces. Always test on a small, hidden area first.

9. Is it safe for white UPVC?
Yes, but be cautious: overuse may slightly warm the tone. Use sparingly and buff well on white surfaces.

10. Do I need to clean the surface before applying?
Yes. Ensure the surface is clean, dry, and free of dirt, grease, and wax before application for best results.

How to use

1. Shake Well Before Use
Ensure all surfaces are clean, dry, and free from dirt, grease, grime, mildew, wax, polishes, and silicone. Test on an inconspicuous area first.

2. Apply Evenly
Spray or pour the product from 15–20cm away, covering the surface liberally and evenly. Use a brush or cloth to spread if needed. For uneven absorption, redistribute surplus oil from shiny to matte areas. Wipe off excess before it becomes tacky.

3. Leave to Work
Allow 10–20 minutes for the oil to penetrate and revive pigments. Wipe off any remaining excess with a lint-free cloth. For enhanced shine, buff the surface with a lint-free polishing cloth.

4. Storage & Reuse
Store in a cool, well-ventilated place, away from direct sunlight and frost. Keep out of reach of children.

How to use pdf

View and download pdf

Sun and weather fade composite doors, uPVC and GRP until they look tired and chalky. GLEAN Door Restore brings back the original depth of colour and sheen without painting. It re-wets the pigment in the faded surface, then leaves a non-tacky, weather-resistant layer with UV protection and water repellency. Touch dry in 15–30 minutes.

  • Restores, doesn't repaint: revives the existing colour rather than changing it.
  • Protects: UV protection and water repellency; the effect typically lasts up to 12 months depending on sun and weather.
  • Lots of surfaces: composite and uPVC doors and windows, fibreglass (GRP), cladding, trims, frames, shutters, guttering and most hard coloured plastics.
  • Aerosol or liquid: 400ml aerosol for quick even coverage; 100ml, 250ml and 1 litre liquid for cloth or brush application.
  • Made in Britain.

How to use

  1. Clean the surface so it's free of dirt, grease, mildew, wax, polish and silicone. Let it dry. Shake well and test a hidden area.
  2. Aerosol: spray evenly from 15–20cm. Liquid: apply with a soft cloth or brush and rub in evenly.
  3. Spread any surplus from shiny areas onto matt areas and wipe off excess before it gets tacky.
  4. After 10–20 minutes, wipe off what's left with a lint-free cloth and buff for extra shine. Fully cured within 24 hours.

Frequently asked questions

How do I restore a faded composite door?
Clean it, apply Door Restore evenly, leave 10–20 minutes, then wipe off the excess and buff. Reapply when the colour starts to fade again.

Can I use it on white uPVC?
Yes, but use it sparingly and buff well, as heavy use can slightly warm the tone.

What can't I use it on?
Painted metal and powder-coated surfaces.

Safety and storage

Test on a small hidden area first. Store in a cool, well-ventilated place away from direct sunlight and frost, out of reach of children. Always read the label.

WHY GOGLEAN?

WHY GOGLEAN?

Go Glean Ltd, a premier UK provider of top-tier hard surface treatments and cleaners. Our commitment to quality ensures that you receive the finest products for all use round the house.