1. What is GLEAN Grout Reviver & Sealer Kit?
GLEAN Grout Reviver & Sealer is a tile grout restoration solution that re-colours, revives, and seals stained or discoloured grout. It instantly refreshes grout, leaving it looking like new while providing long-term protection against stains.
2. Which surfaces can I use it on?
This product is suitable for:
• Interior and exterior grout lines
• Porcelain, ceramic, marble, mosaics, natural stone tiles, terracotta, terrazzo
3. How does it work?
The advanced formula:
• Re-colours and restores old or stained grout
• Provides a waterproof, breathable barrier to protect against moisture, dirt, grease, and staining
• Reduces mould and mildew growth in bathrooms, kitchens, and outdoor tiled areas
4. How do I apply GLEAN Grout Reviver & Sealer?
• Shake the bottle well before use
• Ensure grout is clean and dry
• Apply directly to grout using the included foam brush
• Remove any excess from tiles before it dries
5. Can I apply multiple coats?
Yes. For significant colour changes or heavily stained grout, apply 2 or more coats. Allow 2 hours drying time between coats.
6. How long does it take to dry and cure?
• Touch dry: Approximately 30 minutes
• Ready for light traffic: 2 hours
• Fully cured: 24 hours
7. How much area will one bottle cover?
A 250ml bottle covers up to 30m² per coat, depending on grout width and surface type.
8. Is it safe to use indoors?
Yes. The formulation is non-toxic, low odour, and non-flammable, making it safe for enclosed spaces such as bathrooms and kitchens.
9. Is it safe for children and pets?
Once fully dried, the product is safe. Keep children and pets away during application and drying.
10. Can it be used on coloured grout?
Yes. It can either restore the existing colour or completely change the grout colour.
11. Will it damage tiles?
No. Excess product can be wiped off tiles before it dries, and it does not harm the tile surface.
12. How do I maintain the grout after application?
Clean grout with mild, non-abrasive cleaners. Avoid bleach or acid-based cleaners that may weaken the sealer. Additional coats can be applied anytime to refresh grout.
13. What should I do if I make a mistake during application?
If excess product dries on the tiles, it can usually be removed with a damp cloth or gentle cleaning before full curing.
14. What colours are available?
White, Black, Charcoal, Light Grey, Limestone, and Beige.
15. Where is it made?
Made in Britain.
