Skip to content
FREE NEXT DAY SHIPPING ON ALL ITEMS
FREE NEXT DAY SHIPPING ON ALL ITEMS
Grout Reviver & Sealer Kit | Various Colours | 250ml with Foam Brush

Grout Reviver & Sealer Kit | Various Colours | 250ml with Foam Brush

by GLEAN
£22 - £22
£22
£22 - £22
£22

Restore the original beauty of your tiles with GLEAN Grout Reviver & Sealer, the fast and effective way to recolour, refresh, and protect stained or discoloured grout. Designed for both wall and floor tiles, this advanced formulation instantly transforms tired grout lines, giving your kitchen, bathroom, shower or tiled floors a clean, newly-installed appearance.

Whether you’re refreshing white grout or dramatically changing the colour for a modern aesthetic, GLEAN delivers durable results that last for years.

FAQs

1. What is GLEAN Grout Reviver & Sealer Kit?

GLEAN Grout Reviver & Sealer is a tile grout restoration solution that re-colours, revives, and seals stained or discoloured grout. It instantly refreshes grout, leaving it looking like new while providing long-term protection against stains.

2. Which surfaces can I use it on?

This product is suitable for:
• Interior and exterior grout lines
• Porcelain, ceramic, marble, mosaics, natural stone tiles, terracotta, terrazzo

3. How does it work?

The advanced formula:
• Re-colours and restores old or stained grout
• Provides a waterproof, breathable barrier to protect against moisture, dirt, grease, and staining
• Reduces mould and mildew growth in bathrooms, kitchens, and outdoor tiled areas

4. How do I apply GLEAN Grout Reviver & Sealer?
• Shake the bottle well before use
• Ensure grout is clean and dry
• Apply directly to grout using the included foam brush
• Remove any excess from tiles before it dries

5. Can I apply multiple coats?

Yes. For significant colour changes or heavily stained grout, apply 2 or more coats. Allow 2 hours drying time between coats.

6. How long does it take to dry and cure?
• Touch dry: Approximately 30 minutes
• Ready for light traffic: 2 hours
• Fully cured: 24 hours

7. How much area will one bottle cover?

A 250ml bottle covers up to 30m² per coat, depending on grout width and surface type.

8. Is it safe to use indoors?

Yes. The formulation is non-toxic, low odour, and non-flammable, making it safe for enclosed spaces such as bathrooms and kitchens.

9. Is it safe for children and pets?

Once fully dried, the product is safe. Keep children and pets away during application and drying.

10. Can it be used on coloured grout?

Yes. It can either restore the existing colour or completely change the grout colour.

11. Will it damage tiles?

No. Excess product can be wiped off tiles before it dries, and it does not harm the tile surface.

12. How do I maintain the grout after application?

Clean grout with mild, non-abrasive cleaners. Avoid bleach or acid-based cleaners that may weaken the sealer. Additional coats can be applied anytime to refresh grout.

13. What should I do if I make a mistake during application?

If excess product dries on the tiles, it can usually be removed with a damp cloth or gentle cleaning before full curing.

14. What colours are available?

White, Black, Charcoal, Light Grey, Limestone, and Beige.

15. Where is it made?

Made in Britain.

How to use

1. Application guidance
Surface must be clean and completely dry and free from any other sealers and coatings. Use when surface temperature is between4°C & 32°C. If using more than 1 bottle of a single colour, mix all the material to be used together in a large container to ensure colour uniformity. Ensure that existing grout sits lower than the tile surface. Porous surrounding surfaces may require sealing to ensure product is not absorbed. For use in shower cubicles, the use of a moisture meter can help determine when the existing grout is dry and ready to apply product.

2. Test first
Due to the nature of different surfaces, you should do several tests in inconspicuous areas to determine application method, number of coats and desired results.

3. Preparation
Clean and prepare existing grout joints. Ensure surface is completely dry then sweep, vacuum, or wipe surface clean. For smooth or latex modified grout joints, clean and create texture on existing grout joint (do not use acids on acid sensitive stone).

4. Application
Shake well before use. Apply small amount of product directly onto grout joint. Work the product along the grout joint in a back-forward motion using the Foam Brush. Ensure a thin even coat is applied and minimise the amount spread on to tile surface.

5. Dry
Allow product to dry a minimum 30 minutes (touch dry) then mista small amount of water on the surface. Do not allow product to dry on tile surface for longer than 12 hours. Using a non-abrasive cloth, remove excess product from the tile surface, ensuring that you do not scrub directly into the grout joint. The surface is ready for light traffic after 2 hours. Keep surfacedry for 24 hours. 

Note: When using contrasting colours, more than 1 coat might be necessary with a drying time of 2 hours between each coat.

How to use pdf

View and download pdf

  • TILE GROUT REVIVER: Advanced formula tile grout restorer, re-colours and revives stained and discoloured tile grout. Instantly covers stained and old grout for fresh, new look. Making your kitchen and bathroom tiles look like new.
  • STAIN RESISTANT: GLEAN Grout Reviver & Grout Sealer provides long term protection against staining, ensuring your tile grout looks great for years. The breathable sealer does not trap moisture, allowing vapour to evaporate from tile grout.
  • NON-TOXIC & LOW ODOUR: The non-toxic and low odour formulation makes it perfect for use in enclosed spaces like bathrooms and showers, making it simple to restore your tile grout to its former glory.
  • AVAILABLE IN RANGE OF COLOURS: Quick and simple to use, GLEAN Grout Reviver & Grout Sealer is the easy way to give your bathroom and kitchen tiles a quick makeover. Available in White / Black / Charcoal / Light Grey / Limestone / Beige
  • USE ANYWHERE: Suitable for interior and exterior use, our tile grout reviver is the perfect way to renew and refresh the tile grout in your bathroom, kitchen, shower, toilet, and any other room that has floor or ceiling tiles. Includes foam brush for quick and simple application.
WHY GOGLEAN?

WHY GOGLEAN?

Go Glean Ltd, a premier UK provider of top-tier hard surface treatments and cleaners. Our commitment to quality ensures that you receive the finest products for all use round the house.