1. What does GLEAN Oil & Drive Cleaner do?
It removes tough oil, grease, diesel, and other hydrocarbon-based stains from concrete, block paving, tarmac, patios, and garage floors.
2. What surfaces is it suitable for?
• Driveways (tarmac, concrete, block paving)
• Patios (stone, concrete, paving slabs)
• Garage floors
• Car parks and outdoor hard surfaces
3. Can it be used neat and diluted?
Yes:
• Use neat for heavy, ingrained stains
• Dilute 1:4 with water for general surface cleaning
4. How do I use the cleaner?
1 Apply directly to the stained area (spray or pour)
2 Allow to dwell for 10–20 minutes (longer for tough stains)
3 Agitate with a stiff brush if needed
4 Rinse thoroughly with water (pressure washer optional)
5. Is it suitable for use with pressure washers?
Yes, you can pre-treat surfaces with this cleaner before using a pressure washer for even better results.
6. Will it remove old, set-in oil stains?
Yes, but multiple treatments may be necessary for older or heavily saturated areas.
7. Is it safe for use around plants and grass?
Avoid overspray or run-off onto lawns or garden beds. Rinse any affected areas with water immediately after use.
8. Can I use this indoors?
It’s designed for exterior surfaces. If used indoors (e.g., garage), ensure good ventilation and proper rinsing.
9. How long does it take to work?
You’ll see results within 10–20 minutes, with full effectiveness after rinsing and drying. Re-treat tough stains as needed.
10. Is it safe for all outdoor stone types?
Yes, it’s suitable for most outdoor stone and masonry. Always test on a small inconspicuous area first, especially on delicate or decorative stone.
